[ electronic virtual sound devices ]
[ profile ] [ news ] [ products ] [ videos ] [ blog ] [ clothes ] [ users ] [ media ] [ contact ]
NoiseSoft - NEWS
NoiseSoft Releases the “QU” and “ROOT DELAY” VST Effects
November 26th, 2009.NoiseSoft announces the release of two new effects, the Qu quad filter effect and the Root Delay effect.
The Qu is a new VST quad filter effect plug-in for Windows. The Qu consists of four separate “all band” filters with five separate controls for each channel (A to D). The individual tuning of our custom filters produces audio illusions and phenomena that can not be found anywhere else; phase and frequency based stereo panning controls mean that a user can dial in effects that contrast across the whole audio spectrum, especially when used with track envelopes within the host workstation.
Controls and features:
- VOLUME: This controls the master volume. Lowest setting is silence and highest setting the maximum output.
- MIX: Controls the mix quantity of all filter sections.
- PITCH (A/B/C/D): Adjusts the affected pitch of each individual filter section from low drones to bell-like high pitched ringing.
- RESONANCE (A/B/C/D): Adjusts the resonance of each filter, from minimal effect to extreme phase shifting and everything between.
- FREQ (A/B/C/D): The frequency control for each filter has custom coded extreme frequency shifting, capable of lo-fi filtering in the low knob settings, all the way to harsh industrial/glitch effects.
- LEFT and RIGHT (A/B/C/D): These are separate controls for left and right phase shifting.
The Root Delay is an echo / delay VST effect plug-in for Windows. The Root Delay is designed for creating dub style echo and filter sweeps as well as other delay effects found in all kinds of modern electronic music. The effect features a delay section with separate adjustable controls for left and right time settings and also a filter section with controls for sweep rate and depth. The delay and filter combination produces everything from granular glitch / idm style processing to sweeping dub style echos and slap back effects.The Root Delay is an echo / delay VST effect plug-in for Windows. The Root Delay is designed for creating dub style echo and filter sweeps as well as other delay effects found in all kinds of modern electronic music. The effect features a delay section with separate adjustable controls for left and right time settings and also a filter section with controls for sweep rate and depth. The delay and filter combination produces everything from granular glitch / idm style processing to sweeping dub style echos and slap back effects.
Controls and features:
- LEFT and RIGHT: These are separate controls for left and right echo / delay times
(milliseconds from 0ms to 10ms).
- FEEDBACK: knob is for controlling the amount of echos you would like.
From 1 to (almost) infinity.
- RES knob: Adjusts the resonance of the filter, from minimal effect to drone
sound and everything between.
- CUT: Adjusts the filter cutoff. From very metallic to very (sub)bassy.
- RATE: Adjusts the sweep rate of the filter, from about a minute to pseudo granular.
- DEPTH: Adjusts the depth of the filter effect. From light filtering to very dramatic sweeps.
- WET: Controls the volume of the delay and filter effects combined.
- DRY: Controls the volume of the dry signal.
Pricing & Availability:
The Qu and the Root Delay are both priced at $14 each, both available for Windows as a VST effect plug-in.For more information about Qu visit: http://www.noisesoft.com/qu.html
For more information about the Root Delay visit: http://www.noisesoft.com/root_delay.html
Friday, November 13th, 2009:
NoiseSoft announces the release of The Reductionist, a free VST lo-fi / bit crush experimental effect for Windows.
Single knob design:
- CRUSH: Lowest setting is distorted / overloaded and bit-rate reduced, highest setting is enhanced lo-fi distortion. A very experimental toy to play around with alone, or in combination with other effects.FREE!
For more information, visit http://www.noisesoft.com/noisesoft_the_reductionist.html
Friday, September 25th, 2009:
NoiseSoft announces the release of the Break Filter, a new VST filter and distortion effect plug-in for Windows. The Break Filter is a custom stereo "all band" filter effect with noise based distortion which can take any clean sound from natural gain to frequency and phase shifted industrial chaos.
Controls and features:
- GAIN knob: Lowest setting is pure bypass and highest setting is extreme distortion, almost to the point of white noise. *The filter also works great even when the distortion GAIN knob is set to "0" or bypass.
- PITCH: Adjusts the affected pitch of the filter from low bassy drones to high pitched ringing.
- RESONANCE: Adjusts the resonance of the filter, from minimal effect to drone sound and everything between.
- FREQ: The frequency control for the filter has custom coded extreme frequency shifting, capable of lo-fi filtering in the low knob settings, all the way to harsh industrial/punk effects. The ‘maximum’ setting of this knob put the sound into an inaudible frequency, therefore virtually bypassing the frequency shifting function.
- LEFT and RIGHT: These are separate controls for left and right phase shifting. These control panning for the different layers of our complex resonant filter layers..
Pricing & Availability
Priced at $29 US, the Break Filter is available for Windows as a VST effect plug-in.For more information, visit http://www.noisesoft.com
[ privacy policy] [ copyright info] [ technical info ] [ terms and conditions ] [ contact ]